Home Up SS Wood SS Steel Sheetrock Hurricane Ceiling Screws Pole Tool Sammy Assortment Sammy Saddle Sammy Xpress Sammy Swivel Head Dektite Install Kit GST - Wood Sammy SWG - Wood SW DST - Steel Sammy SWDR - Steel SW CST - Concrete Sammy SWC - Concrete SW

All-thread Rod Anchoring Systems

Steel Sidewinder - Self drilling & self-taping into steel   

                                         

 

Steel • 1/4" Rod • Horizontal Mount
#14SW
Item #101

PN  8114910

Use #14SW Nut Driver (Item #101)

Item
No		 Part # Model Screw Description Rod
Size 		Shank Diameter Minimum Thickness Max Thickness Actual Shear Pullout
2003 8047957 SWD 100 1/4-14 x 1 1/4-20 1/4 .066" - 16 ga. 1/4" 1477# / 16 ga.
206 8049957 SWDR 100 1/4-20 1/4-20 1/4 .036 - 20 ga. 1/4" 1900# / 20 ga.

 

Steel • 3/8" Rod • Horizontal Mount
#14SW
Item #101

PN  8114910

Use #14SW Nut Driver (Item #101)

  Item
No		 Part # Model Rod Size Description UL
Test
Load
(lb)		 UL Minimum Steel Thickness inches FM
Test
Load
(lb)		 FM Minimum Steel Thickness inches UL/FM Pipe Size inches Minimum
Thickness		 Max.
Thick.		 Actual
Shear/Pullout
  39 8050957 SWD 10 3/8-16 ¼-14x1           .066"-16ga 1/4 1477# / 16 ga.
  40 8051957 SWD 15 3/8-16 ¼-14x1½ Note: Screw diameter/design/performance for DST 10 (1” length) through DST 30 (3” length) are constant. Only the lengths vary.
  41 8052957 SWD 20 3/8-16 ¼-14x2
  42 8053957 SWD 516 3/8-16 5/16-18x1¼
43 8055957 SWDR 1" 3/8-16 ¼-20x1 1500 .037 1475 .060 4/4 .036"-20ga 1/4" 1900# / 20 ga.
44 8056957 SWDR 516 3/8-16 5/16-18x1¼ 1500 .037 1475 .060 4/4 .036"-20ga 1/4" 2480# / 20 ga.
46 8054957 SWDR 1½" 3/8-16 ¼-20x1½ 1500 .037 1475 .060 4/4 .036"-20ga 1/2" 2375# / ¼"
  45 8057957 SWT 15 3/8-16 12-24x1½           .25"-¼" 1/2"  
¹  When installing DSTR or SWDR add retainer nut and torque to 20 foot lbs. for maximum pull out in steel.

Click on symbol to link direct to UL Online Certification

Click on symbol to link direct to FM Global Loss Prevention Data Sheet 1-2.

         Legend
Factory Mutal Approved
UL-listed.
Box quantity 25. Standard box quantity 125, except where so indicated.

Factory Mutual and UL listed approvals - pdf

Link to DOWNLOADS including:   Product Catalog, engineering (CAD) drawings, list of FM approvals,  ICC Evaluation Service, Miami Dade Online Certification and UL test reports.

Download Steel Sammy Sell Sheet.pdf

Installation Instructions
 
DST, DSTR, TEK 50, SWD, SWDR, SWT
See Figures 1 through 4 (vertical) and 11 through 14 (horizontal)  of detailed installation instructions for illustrations.
  • DST self-drills & self-taps into steel up to 3/16" thick.
  • DSTR self-drills & self-taps into steel up to 3/16" thick and accepts retainer nut.
  • TEK 50 - Self-drills & self- taps into steel up to ½" thick.
  • SWD self-drills & self-taps through 3/16" steel.
  • SWDR self-drills & self-taps through 3/16" steel and accepts retainer nut.
  • SWT self-drills & self-taps through ½" steel.
Step 1: Insert the appropriate nut driver into a 3/8" or ½" portable drill:
  1. use #14 Nut Driver for DST, DSTR, TEK 50;
  2. use #14SW Nut Driver for SWD, SWDR, SWT.

Step 2: Insert the screw into the nut driver. Now you are ready to install the screw.

Step 3: Position drill and begin installation:

  1. for installing DST, TEK 50, DSTR*, the drill should be in a vertical position;
  2. for installing SWD, SWDR*, SWT, the drill should be in a horizontal position at a right angle to the structural member.

Step 4: When the nut driver spins freely on the cap of the screw installation is complete.

Step 5: Screw is now ready to receive ¼", 3/8", ½" or metric all-thread rod or bolt stock.

  
Warranty compliance requires that appropriate nut drivers be used for all installations.
Download CAD Drawings Installation Instructions Safety Information Performance Data

Home SS Wood SS Steel Sheetrock Hurricane Ceiling Screws Pole Tool Sammy Assortment Sammy Saddle Sammy Xpress Sammy Swivel Head Dektite Install Kit GST - Wood Sammy SWG - Wood SW DST - Steel Sammy SWDR - Steel SW CST - Concrete Sammy SWC - Concrete SW

Information: submit a request or contact, marketing@itwbuildex.com

Last modified: August 26, 2008         -   An independent, non-profit content rating organization.

Copyright © 2002-2008:   ITW Buildex. All trademarks or registered trademarks used are trademarks of Sammy Super Screw®, ITW Buildex and Illinois Tool Works, Inc.   ITW Buildex Privacy Policy

ITW Buildex uses WebTrends Live to analyze traffic to this web site.  WebTrends Live does not create individual profiles for visitors.  Unlike some tracking services WebTrends Live does not have a database of individual profiles for each visitor.  WebTrends Live only collects aggregate data.  For more information about WebTrends Live privacy policy, please click here.

Send mail to: webmaster@itwbuildex.com  with questions or comments about the webpage.