SWG - Wood SW

All-thread Rod Anchoring Systems

Wood Sidewinder - Self drilling & self-tapping into wood

WOOD • 1/4" Rod • Horizontal Mount							#14SW Item #101 PN 8114910
Use #14SW Nut Driver (Item #101)
Item No	Part #	Model	Rod Size inches	Shank Diameter inches	Shank Length inches	Box Qty
4016	8018957	SWG 100	1/4-20	1/4	1	125
300	8019957	SWG 200	1/4-20	1/4	2	125

WOOD • 3/8" Rod • Horizontal Mount											#14SW Item #101 PN 8114910
Use #14SW Nut Driver (Item #101)
	Item No	Part #	Model	Rod Size inches	Shank Diameter inches	Shank Length inches	UL Test Load (lb)	UL Max Pipe Size inches	Actual Shear/Pullout	Box Qty
	Item No	Part #	Model	Rod Size inches	Shank Diameter inches	Shank Length inches	Minimum Wood Thickness 1.5 inches	UL Max Pipe Size inches	Actual Shear/Pullout	Box Qty
	18	8020957	SWG 10	3/8 - 16	¼	1	300	CPVC 1-1/2		125
	19	8021957	SWG 20	3/8 - 16	¼	2	1050	2-1/2 - 3"*	1725# - Fir	125
	26	8022925	SWG 25-380	3/8 - 16	3/8	2½	1500	3-1/2 - 4"**	2249# - Fir	125
	25	8023925	SWG 30	3/8 - 16	¼	3				125

**SWG 20 Maximum pipe size in composite wood joist allowed by UL is 2-1/2"
**SWG 20 Maximum pipe size in wood timber or joist allowed by UL is 3"

***SWG 25-380 Maximum pipe size in composite wood joist allowed by UL is 3-1/2"
***SWG 25-380 Maximum pipe size in wood timber or joist allowed by UL is 4"

Click on symbol to link direct to UL Online Certification

Legend
	UL-listed.
	Box quantity 25. Standard box quantity 125, except where so indicated.

Factory Mutual and UL listed approvals - pdf

Link to DOWNLOADS including: Product Catalog, engineering (CAD) drawings, list of FM approvals, ICC Evaluation Service, Miami Dade Online Certification and UL test reports.

Download Wood Sammys Sell Sheet.pdf

Installation Diagrams

Composite Joist

Consult truss manufacturer for recommended installation point.

See Special Notes

Installation per NFPA 13

All installations must be performed with appropriate nut drivers to comply with warranty.

Installation Instructions

Wood Sammy (GST) • Wood Sidewinder (SWG)
Self drilling & self-tapping into wood

See Figures 1 - 4 (vertical) and 11 - 14 (horizontal) of detailed installation instructions for more diagrams and illustrations.

Step 1
Insert the appropriate nut driver into a 3/8" or ½" portable drill:

use #14 Nut Driver for GST for 3/8" and ¼" rod;
use #14SW Nut Driver for SWG, and for GST for ½" rod.

Step 2
Insert the screw into the nut driver. Now you are ready to install the screw.

Step 3
Position drill and begin installation:

for installing GST, drill should be in a vertical position;
for installing SWG drill should be in a horizontal position at a right angle to the structural member.

Step 4
When the nut driver spins freely on the cap of the screw installation is complete.

Step 5
Screw is now ready to receive ¼", 3/8", ½" or metric all thread rod or bolt stock.

• Must be installed with appropriate nut driver to comply with warranty.
• Eye protection should be worn at all times when installing this product.

Download CAD Drawings

Installation Instructions

Safety Information

Information: submit a request or contact, marketing@itwbuildex.com

Last modified: August 26, 2008 - An independent, non-profit content rating organization.

Copyright © 2002-2008: ITW Buildex. All trademarks or registered trademarks used are trademarks of Sammy Super Screw®, ITW Buildex and Illinois Tool Works, Inc. ITW Buildex Privacy Policy

ITW Buildex uses WebTrends Live to analyze traffic to this web site. WebTrends Live does not create individual profiles for visitors. Unlike some tracking services WebTrends Live does not have a database of individual profiles for each visitor. WebTrends Live only collects aggregate data. For more information about WebTrends Live privacy policy, please click here.

Send mail to: webmaster@itwbuildex.com with questions or comments about the webpage.