ITW Buildex Scots Long Life Metal Roof Teks Fasteners

Scots^® Long Life Teks^® Fastener

The Original Buildex Scots 300 Stainless Steel Encapsulated fastener for long life metal roof and wall applications.

scots

FEATURES

300 Series Stainless steel encapsulated head will never rust….ever.
Combines 300 series stainless steel exterior
with the strength of carbon steel.
For improved appearance and extra life an
integral design controls the EPDM washer.
Climaseal® finish provides excellent corrosion
resistance and lower tapping.

HEAD STYLE

Scots Head

MODELS
INSTALLATION STEPS
APPLICATIONS
DOWNLOAD
PULLOVER VALUES

SCOTS LONG LIFE TEKS FASTENER
PART NO.	DESCRIPTION	DRILL POINT
1387253	1/4-14 X 7/8"	1
1175153	1/4-14 X 1-1/8"	1
1165253	12-14 X 1"	2
1167253	12-14 X 1-1/4"	2
1168253	12-14 X 1-1/2"	2
1616000	1/4-14 X 1-1/4"	3
1163000	12-24 X 2"	5
1178253	1/4-14 X 3/4"	Type AB
1180225	17-14 X 1"	Type AB

STEP 1:
A standard screw gun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screw gun should be a minimum of 4 amps and have an RPM range of 0-2500.

STEP 2:
Adjust the screw gun nosepiece to properly seat the fastener.

STEP 3:
New magnetic sockets must be correctly set before use. Remove chip build-up as needed.

STEP 4:
The fastener is fully seated when the head is flush with the work surface.

STEP 5:
Overdriving may result in torsional failure of the fastener or strip out of the substrate.

STEP 6:
The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

scots tek


2010-2011 BUILDEX CATALOG	SCOTS DATASHEET	SCOTS TECHNICAL DRAWINGS

PULLOVER VALUES (average lbs. ultimate)
Fastener		Steel Gauge
Dia.	Point	26	24	22	20	18	16
12	2	687	1029	1274	1368	2433	3039
12	5	610	1013	1128	1163	1887	2305
1/4	1	602	1018	1198	1382	2307	2843
1/4	AB	-	-	-	-	-	-
17	AB	-	-	-	-	-	-