ITW Buildex Teks 3 Medium Duty Fasteners

Teks^® 3 Self-Drilling Fastener - LIGHT/MEDIUM DUTY

Light to medium duty steel-to-steel fasteners for attaching clips, duct straps, brick ties or wall panels to steel .

teks 3

FEATURES

Ideal for attaching clips, duct straps, brick ties or accessories to steel framing.
Ideal for attaching wall panels to girt and medium gauge steel to steel framing.
Sharp convex drill point has precise cutting edges to improve drill performance with less effort.
Non-walking point provides fast material engagement.
Climaseal® finish provides excellent corrosion resistance and lower tapping torque.
Speciality HVAC fasteners have high head, serrations, and zinc plating.

HEAD STYLES

Hex Washer Head (HWH)

Phillips Pan Head (PPH)

Hex Washer Head (HWH)
with Serrations

Phillips Oval Head

MODELS
INSTALLATION STEPS
APPLICATIONS
DOWNLOAD
PULLOVER VALUES

TEKS 3 SELF-DRILLING FASTENER - MEDIUM DUTY
PART NO.	DESCRIPTION	HEAD STYLE
1398000	10-16 X 1/2"	PPH
1541000	10-16 X 5/8"	PPH
1224000	10-16 X 3/4"	PPH
1542000	10-16 X 3/4"	Phillips oval
1397000	10-16 X 1/2"	HWH
1127000	10-16 X 5/8"	HWH
1128000	10-16 X 3/4"	HWH
1129000	10-16 X 1"	HWH
1707200	10-16 X 3/4" HVAC*	HWH with Serrations
1821200	10-16 X 3/4" HVAC*	HWH with Serrations
1544000	10-16 X 1"	Phillips oval
1545000	10-16 X 1"	PPH
1130000	10-16 X 1-1/4"	HWH
1546000	10-16 X 1-1/4"	Phillips oval
1131000	10-16 X 1-1/2"	HWH
1550000	10-24 X 3/4"	HWH
1551000	10-24 X 1"	HWH
1134000	12-14 X 3/4"	HWH
1087000	12-14 X 3/4"	HWH
1136000	12-14 X 1"	HWH
1140000	12-14 X 2"	HWH
1553000	12-14 X 2-1/2"	HWH
1143000	12-14 X 3"	HWH
1146000	12-14 X 4"	HWH
1147000	1/4-14 X 3/4"	HWH
1149000	1/4-14 X 1"	HWH
1150000	1/4-14 X 1-1/4"	HWH
1713053	1/4-14 X 1-1/4"	HWH Shoulder
1152000	1/4-14 X 1-1/2"	HWH
1155000	1/4-14 X 2"	HWH
1554000	1/4-14 X 2-1/2"	HWH
1157000	1/4-14 X 3"	HWH
1304000	1/4-14 X 4"	HWH
1586000	1/4-14 X 3/4"	HWH (7/16 AF)
1587000	1/4-14 X 1"	HWH (7/16 AF)

*Electro-Zinc Finish

STEP 1:
A standard screw gun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screw gun should be a minimum of 4 amps and have an RPM range of 0-2500.

STEP 2:
Adjust the screw gun nosepiece to properly seat the fastener.

STEP 3:
New magnetic sockets must be correctly set before use. Remove chip build-up as needed.

STEP 4:
The fastener is fully seated when the head is flush with the work surface.

STEP 5:
Overdriving may result in torsional failure of the fastener or strip out of the substrate.

STEP 6:
The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

STEEL-TO-STEEL APPLICATIONS


2010-2011 BUILDEX CATALOG	LIGHT DUTY DATASHEET	MEDIUM DUTY DATASHEET	TEKS 3 TECHNICAL DRAWINGS

PULLOVER VALUES (average lbs. ultimate)
Fastener		Steel Gauge
Dia.	Point	26	24	22	20	18	16
1/4	3	598	932	1276	1393	1950	2388