ITW Buildex Rigid Insulation Teks Fasteners

Teks^® Rigid Insulation Fastener

The original self-drilling fasteners designed specifically for exterior rigid insulation applications.

rigid insulationt teks

FEATURES

Unique rider section stops panel jacking, point burnout and breakage.
Washer seals even when driven at a 12° angle.
Climaseal® finish provides excellent corrosion resistance and lower tapping.

HEAD STYLES

Maxiseal Head

Scots Head

MODELS
INSTALLATION STEPS
APPLICATIONS
DOWNLOAD
PULLOVER VALUES

TEKS RIGID INSULATION FASTENER
PART NO.	DESCRIPTION	HEAD STYLE	DRILL POINT
1034000	12-14 X 1-7/8"	Maxiseal	3
1036000	12-14 X 2-3/8"	Maxiseal	3
1038000	12-14 X 3-1/4"	Maxiseal	3
1040000	12-14 X 4"	Maxiseal	3
1169200	12-14 X 1-7/8"	Scots	3
1170200	12-14 X 2-3/8	Scots	3
1171200	12-14 X 3-1/4"	Scots	3
1172200	12-14 X 4"	Scots	3

STEP 1:
A standard screw gun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screw gun should be a minimum of 4 amps and have an RPM range of 0-2500.

STEP 2:
Adjust the screw gun nosepiece to properly seat the fastener.

STEP 3:
New magnetic sockets must be correctly set before use. Remove chip build-up as needed.

STEP 4:
The fastener is fully seated when the head is flush with the work surface.

STEP 5:
Overdriving may result in torsional failure of the fastener or strip out of the substrate.

STEP 6:
The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

exterior rigid teks


2010-2011 BUILDEX CATALOG	TEKS RIGID INSULATION DATASHEET	TEKS RIGID INSULATION TECHNICAL DRAWINGS

PULLOVER VALUES (average lbs. ultimate)
Fastener		Steel Gauge
Dia.	Point	Style	26	24	22	20	18	16
12	3	Maxiseal	625	984	1291	1585	2732	2991
12	3	Scots	610	1013	1128	1163	1887	2305