For 3/8" Rod
SXP 20 for 3/8" Rod
Structural attachment for installation of branch/end of line restraint using
3/8" all thread (.299" OD) or end thread rod (.374" OD). Designed for use in
metal deck ranging from 22 ga. through 1/8" in low slope or pitched roof
designs (12/12). The SXP 20 may be used to attach short length of rod to
eliminate seismic bracing per NFPA 13, 9.3.5.3.8, (2007).
SXP 35 for 3/8" Rod
Structural attachment for installation of branch/end of line restraint using
3/8" all thread (.299" OD) or end thread rod (.374" OD). Designed for use in
steel purlin ranging from 16 ga. through 1/8"in low slope or pitched roof
designs (12/12), the SXP 35 may be used to attach short length of rod to
eliminate seismic bracing per NFPA 13, 9.3.5.3.8, (2007).
For 1/2"
Rod
SXP 2.0 for 1/2" Rod
Structural attachment for installation of branch/end of line restraint using
1/2" all thread (.405" OD) or end thread rod (.500" OD). Designed for use in
metal deck ranging from 22 ga. through 1/8" in low slope or pitched roof
designs (12/12).
SXP 3.5 for 1/2" Rod
Structural attachment for installation of branch/end of line restraint using
1/2" all thread (.405" OD) or end thread rod (.500" OD). Designed for use in
steel purlin ranging from 16 ga. through 1/8" in low slope or pitched roof
designs (12/12). |
|
For 3/8"
Rod
SH-TEK 50 for 3/8" Rod
Structural attachment for installation of branch/end of line restraint using
3/8" threaded rod (.299" OD) or end thread rod (.374" OD). Designed for use
in bar joist, I-beam and hollow structural steel ranging from 1/8" to 1/2"
in low slope or pitched roof designs (12/12). This product may be used to
attach short length of rod to eliminate seismic bracing per NFPA 13,
9.3.5.3.8, (2007).
The SH-TEK 50 model
provides upper structural attachment in a wide range of steel thicknesses,
from 1/8" through 1/2". This fastening system provides a secure and
economical attachment to the structure.
For 1/2" Rod
SH-TEK 5.0 for 1/2" Rod
Structural attachment for installation of branch/end of line restraint using
1/2" threaded rod (.405 OD) or end thread rod (.500 OD). Designed for use in
bar joist, I-beam and hollow structural steel ranging from 1/8" to 1/2" in
low slope or pitched roof designs (12/12).
The SH-TEK 5.0 model provides upper
structural attachment in a wide range of steel thicknesses, from 1/8"
through 1/2". This fastening system provides a secure and economical
attachment to the structure. |
 |
|
SH-GST/CST 20 for 3/8" Rod &
SH-GST/CST 2.0 for 1/2" Rod
Designed for use in wood
structural member or concrete structures such as poured concrete. In wood
structures the SH-GST/CST 20 or 2.0 can be used in a minimum thickness of 2"
(nominal 1-1/2") or composite wood joists. Consult manufacturer for
recommended installation point. in concrete structures the SH-GST/CST 20 or
2.0 can be used in concrete structures such as poured concrete, T- orL-beams
with compressive strength of 3000-5000 psi.
|
|
Sidewinder for Wood
SWG 20 for SWG 25-380 for 3/8" Rod
Structural attachment fitting for installation of branch/end of line
restraint using 3/8" threaded rod. Designed for use in wood structural
member with a minimum thickness of 2" (nominal 1-1/2"). Can be used in
composite wood joists; consult manufacturer for recommended installation
point. These fastening systems provide a secure and economical attachment to
the structure.
The SWG 20 and SWG 25-380 models provide a one-piece upper
structural attachment in a wide range of wood thicknesses. Pre-drilling may
be required for model SWG 25-380.
Sidewinder for Steel
SWDR 1-1/2, SWDR 516,
&
SWXP 35 for 3/8" Rod
Structural attachment for installation of branch/end of line restraint using
3/8" threaded rod. Used primarily in purlin, bar joist, or other steel
structural members. These fastening systems provide a secure and economical
attachment to the structure.
The SWDR 1-1/2 model provides upper structural attachment in a range of
steel thicknesses, from 3/16" through 1/2". A retaining nut is included with
each fastener.
The SWDR 516 model provides upper structural attachment in a
range of steel thicknesses, from 20 ga. through 1/8". A retaining nut is
included with each fastener.
The SWXP 35 model provides upper structural attachment in a
range of steel thicknesses, from 16 ga. through 1/8". An expandable sleeve
is included with each fastener, eliminating need for retaining nut.
Sidewinder for Concrete
SWC 20 for 3/8" Rod
Structural attachment for installation of branch/end of line restraint using
3/8" threaded rod. The SWC 20 is designed for use in concrete structures
such as poured concrete, T- or L-beams with compressive strength of
3000-5000 psi. This fastening system provides a secure and economical
attachment to the structure. |
 |
